Sirca

Wood Coatings (ITALY)

Home Parquet Finishes

Parquet Finishes

01. Parquet Sealer (FPU35)

This is a polyurethane sealer with good characteristics of sanding, ease of application and filling properties. It’s fast drying, and it should be applied by spray (usually airmix) with manual and automatical systems. It is possible to apply up to three layers. The first layer dries in about 1 hour at 20 °c. After that it is possible to apply the next layer without sanding, or with slight sanding after one hour and a half. It’s very transparent and elastic, so suitable as sealer for parquet flooring.

PHYSICAL AND CHEMICAL PROPERTIES

PROPERTIES
Specific weight: 0,96 ± 0,01 g/cc at 20°C
Viscosity: (DIN 4 at 20°C) 55” ± 5
Solid content: 38% ± 1%

APPLICATION METHOD

Spray and curtain coater

SPECIFICS

PREPARATION
FPU35 100 parts by weight;
CT35 50 parts by weight;
DPU809 30-50 parts by weight

EXPENDITURE
100-220 g/sm on one, two or three layers. Intermediate sanding after 90 minutes.

DRYING TIME
• Flash off in 20-25 minutes;
• Touch dry in 60-90 minutes;
• Stackable in 6 hours minimum.

STORAGE

Store in cool, well ventilated places. The components react with atmospheric moisture. Keep the partially used packaging tightly closed. The storage period is 12 months in original sealed packs.

02. Parquet Top Coat Matt (OPU60G30/70)

This is a series of matt self sealers characterized by excellent resistance to scratches. It is suited for wooden floors and wooden staircases. It is characterised by very good transparency and good sandability. It’s suggested to use fpu35 as first coat, in order to increase the elasticity of the full cycle.

PHYSICAL AND CHEMICAL PROPERTIES

PROPERTIES

Specific weight: 0.98 ± 0.02 g/cc at 20°C
Viscosity:140” ± 5 (Ford cup 4 at 20°C).
Solid content: 50 ± 1%

APPLICATION METHOD

By spray, roller or brush.

SPECIFICS

PREPARATION
First option (Self sealer): SEALER
OPU60 100 parts by weight
CT35 100 parts by weight
DPU809 10 parts by weight
TOPCOAT
OPU60 100 parts by weight
CT35 100 parts by weight
DPU809 10 parts by weight

Second option (sealer + topcoat):
SEALER
FPU35 100 parts by weight
CT35 50 parts by weight
DPU809 10 parts by weight
TOPCOAT
OPU60 100 parts by weight
CT35 100 parts by weight
DPU809 10 parts by weight

EXPENDITURE
100-150 g/sm on one coat. 1-3 coats are allowed.

DRYING TIME
DRYING at 20ºC:
• Dust free in 30-45 minutes;
• Touch dry in 60-90 minutes;
• Stackable in 24 hours;
• Walkable in 48 hours.

01. Parquet Sealer (FPU35)

Waterborne self sealer for parquet flooring.
Gloss Level: 40 gloss unit

PHYSICAL AND CHEMICAL PROPERTIES

PROPERTIES
Specific weight : 1.03 ± 0.01 (g/cc at 20° C)
Solid content : 40% ± 1
Viscosity: (cps) 10000 ± 1000
Tix index: 2,3 ± 0,5 (Brookfield HB3 aspo n°3 speed 5 – 50 rpm)

APPLICATION METHOD

By spray

SPECIFICS

PREPARATION
FWE600 100 parts in weight
Water 0-20 parts in weight

EXPENDITURE
120-150 wet microns on one or two coats

DRYING TIME
DRYING: at 20°C:
• Dust free in 40 minutes;
• Touch dry in 80 minutes;
• Stackable in 12 hours
• Sandable in 8 hours

STORAGE

Keep cans in cool, ventilated environments; if the products are only partially used, close the packaging perfectly and use the remaining product as soon as possible. Keep away from frost.