SIRCA LUNA Exterior Wall Primer is suitable for use as a primer for masonry topcoats like distemper, emulsions, lustre and matt wall finishes. It helps in providing a suitable surface for application of subsequent coats of putty and finish paint.
DIRECTIONS FOR USE:
PLASTER The masonry surface to work on should be treated and well cured before starting the process of SIRCA LUNA (Wall Primer). Better to allow a gap of 28 days before the process.
CLEANING Surface should be free from any loose paint, dust or grease. Growth of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use SIRCA Paints Damp Block to limit further dampness. Even after cleaning if the surface shows chalkiness, use SIRCA Paints Exterior Sealer to get an even surface.
FILLING FOR CRACKS 3mm SIRCA Paints Crack Seal could be used for the fillers.
FILLING FOR HOLES & DENTS In case of dents and holes use SIRCA Paints Acrylic Wall Putty or white cement and fine sand in the ratio 1:3.
- Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application.
- Do not over-thin or over-extend the brush.
- Stir well and strain before use.
POST PAINTING CARE
Apply an emulsion coat over Exterior Wall Primer.